Preva Pump - 50
2-year warranty, suitable for saltwater and seawater
Code: 573050
Producer: VAGNERPOOL
Last 2 pc(s) in stock
RECOMMENDED
FREE SHIPPING GLS
349,14 €
283,85 € exc. VAT
283,85 € exc. VAT
Self-priming pump with large-capacity pre-filter- Each unit is tested (has its own identification “birth” sheet with measured technical data attached to the back of the manual)
- Pump body and diffuser made of polypropylene reinforced with glass fiber provide above-standard lifespan
- Transparent polycarbonate cover for easy pre-filter inspection
- Unique conical lid seal system for the pre-filter
- Two connection options – internal thread 1 1/2" or detachable connection with output for bonding 50 mm
- Sealing segment made of carbon-ceramics and AISI 316 stainless steel is housed in bronze bearing
- Axis of the pump is not in contact with the pumped water
- Lifetime-lubricated motor bearings for long life and quiet operation
- Lower operating temperature of the motor
- Two motor types – 0.5 HP for model 25, 33, 50 and 1 HP for model 75 and 100 (power is determined by the turbine capacity)
- Preva pumps can be used for saltwater and seawater.
Warranty: 2 years
Technical data:
| Product type: | Filtration pump |
| Body material: | Polypropylene reinforced with glass fiber |
| Seal segment material: | Carbon-ceramics and stainless steel AISI316 |
| Motor protection: | IP 55 |
| Power: | 0.37 kW |
| Output current: | 3.3 A |
| Speed: | 2900 rpm |
| Flow rate: | 9 m3/h |
| Power input: | 0.57 kW |
| Voltage: | 230 V |
| Lifetime-lubricated motor bearings: | Yes |
| Suction/discharge connections - glued: | 50 mm |
| Suction/discharge connections - thread: | 1 1/2 "in |
| Noise: | 70 dB |
| Self-priming: | Yes |
| Each unit tested: | Yes |
| A shaft in contact with pumped water: | No |
| Turbine material: | Polypropylene with glass fiber and brass bearing |
| Max. working pressure: | 2.5 bar |
| Pre-filter: | Yes |
| For sea water up to 5 g/l (<0.5%): | Yes |
| For sea water above 5 g/l (>0.5%): | Yes |
* - Flows are given in m3/h at 10 m head.
This form is not used to order goods!
.jpg)
