Griffon UNI-100 Adhesive - 125g - tuba

For bonding tensile-strength joints of pressure pipes (e.g., potable water piping) with PVC-U fittings. Shake Griffon adhesive well before use. On the cleaned and dry surfaces, apply with a brush a continuous and even layer of adhesive along the length (thinner at the neck and thicker at the end of the pipe). Insert the pipes and fittings fully to the stop so you do not twist the bonded parts and hold for a few seconds. Bonded parts must be pushed in within 4 minutes from the start of applying the adhesive. Temperature above +25°C or a thinner layer of adhesive causes shortening of the open time. Store the adhesive at temperatures from 5°C to 25°C.