Flocculant Floc + C 20L - 5L

FLOC+C is a highly effective mixture of polymer flocculants and coagulant for clarifying pool water. It also removes the finest turbidity by aggregating it into solid flocs that are captured by the filter. The high efficiency results from years of development by ASEKO.

For proper dosing of FLOC+C, use the ASIN Aqua device.

• Dose: 10 – 100 ml per hour, dosing continuously with a slow-running pump. 1 ml of FLOC+C is injected per 1 m3 of water circulating through the filter.
• pH: recommended pH range for pool water is from 6.4 to 7.6.

WARNING

H290 – May be corrosive to metals.

H319 – Causes serious eye irritation.

P101 – If medical advice is needed, have container or label at hand.

P102 – Keep out of reach of children.

P103 – Read label before use.

P234 – Keep only in original container.

P280 – Wear protective eyewear/face protection.

P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.

P337+P313 – If eye irritation persists: Get medical advice/o treatment.

P501 – Dispose of contents/containers in accordance with local regulations

ACTIVE INGREDIENTS: Polyaluminiumchlorite 10%, index number 008-003-00-9, CAS 1327-41-9

FORM: clear liquid

INTENDED USE: flocculation and coagulation of pool water

DOSE: 10 - 100 ml/hour (depending on the performance of the filtration pump)

APPLICATION: dosing with the ASIN Aqua device

STORAGE AND DISPOSAL: Store in tightly closed containers in a dry, cool, well-ventilated place, protected from light, at a maximum temperature of 25 °C, the minimum permissible storage temperature is -10°C. Store away from heat and ignition sources. Protect from direct sunlight. Containers must be kept closed to prevent internal pressure buildup.


KEEP OUT OF REACH OF CHILDREN