Automatic control valve with side connection to filter - 6/4"

To achieve optimal water parameters in the pool, the filtration system must be in operation daily. The filtration system should be flushed and kept in good condition depending on dirt buildup. Otherwise it becomes clogged with impurities and the pool water becomes cloudy with the formation of algae or other undesirable phenomena, which discourage us from swimming in the pool. Subsequently there is nothing left but to try to "heal" the water with chemicals or to replace it completely.

Automatic 6-way control valve. Using the valve panel you can set the filtration system of your pool to fully automatic operation, which simplifies its maintenance and leaves you more time for relaxation and healthy rest.

The automatic valve is controlled by an adjustable pressure switch (0,3 - 2 kg/cm², factory set to 1,5 kg/cm²), which, when the filter is clogged with dirt, sends a signal to perform a backwash and then a filter flush. If the automatic valve does not receive a signal from the pressure switch within 7 days (the filter is not dirty), it will automatically perform 1 backwash and a backwash flush (this function can be disabled by a micro-switch on the valve board). The backwash duration can be set to 0,5, 1, 2, 3 or 4 minutes, and the backwash flush duration to 20 or 40 seconds. If needed, it is possible using a special button on the valve and a three-position switch in the manifold to set the valve to drain water from the pool. Connection to the filtration pump ensures its shutdown with each valve repositioning. As an optional component a manual switch can be provided to start backwash and backwash flush according to the operator's wishes.