Automatic control valve with side connection to filter - 2

To achieve optimal water parameters in the pool, the filtration system must be in operation daily. The filtration unit should be flushed and kept in good condition depending on the level of dirt buildup. Otherwise it becomes clogged with debris, leading to cloudiness of the pool water and the formation of algae or other unpleasant phenomena that deter us from swimming. Subsequently, there is nothing left but to try to "revive" the water with chemicals or to replace it entirely.

Automatic 6-way control valve. Using the valve panel, you can set the filtration system of your pool to full automatic operation, thereby simplifying maintenance and leaving you more time for relaxation and healthy rest.

The automatic valve is controlled by a configurable pressure switch (0.3 - 2 kg/cm², factory setting at 1.5 kg/cm²), which, when the filter is clogged with debris, signals a backwash and then a settling backwash of the filter. If the automatic valve does not receive a signal from the pressure switch within 7 days (the filter is not clogged with debris), it will automatically perform one backwash and settling backwash (this function can be disabled by a micro-switch on the valve board). The duration of backwash can be set to 0.5, 1, 2, 3 or 4 minutes, and the duration of the settling backwash to 20 or 40 seconds. If needed, a special button on the valve and a three-position switch in the manifold can set the valve to drain water from the pool. Connection to the filtration pump ensures its shutdown with every valve reconfiguration. As an optional component, a manual switch can be provided to start backwash and settling backwash upon operator request.