Action-10, chlorine tablets 200 g, 5 kg

Biocidal product. 10 effects: disinfects, destroys and sediments algae, destroys bacteria, destroys viruses, destroys fungal cultures, flocculates, coagulates impurities, lowers pH, stabilizes chlorine and prevents scale formation.

 

Tablets 200g of a special composition for killing bacteria, viruses and microorganisms in pool water. The tablets also act prophylactically against the formation of water algae and help maintain water clarity. This complex preparation provides 10 effects to preserve the quality and hygienic safety of pool water.

Contains 90-100g/100g trichloroisocyanuric acid, 2.4g/100g copper sulfate, and 1-3g/100g aluminum sulfate.

SAFETY WARNINGS
Use biocidal products safely. Always read the label and accompanying information before use.
 

 

Initial dosing:

after reaching a free chlorine value of 0.6 g/m3, apply 1 tablet (200 g) Action-10 for every 20 m3 of pool water.

 

Subsequent dosing :

0.5-1 g Action-10 per 1 m3 of water daily so that free chlorine content does not exceed 0.6 g/m3

Keep pH at the desired value 7.2 - 7.6

 

Test the free Cl content in the water daily with a Cl + pH tester kit. Actual consumption of the product may vary depending on pool operating conditions, water temperature and level of contamination.

 

Place the necessary amount of Action-10 tablets into the skimmer basket. Start the filtration system. It is essential to filter the entire volume of the pool daily.

 

WARNING:

The product can be used only in pools with a filtration system. The product cannot be applied freely on the water surface or in surface floating devices for safety reasons, as there is a risk of skin irritation, especially for children. After applying the product, check the free Cl concentration in the water with a tester. If the free Cl content is higher than 0.6 g/m3, wait or neutralize the free Cl with a neutralizer (CTX - 12) to the stated level.

For all pools, regularly replace the water to prevent increased mineralization and the presence of cyanuric acid. Its maximum permissible concentration is 25 g/m3 (check with the test kit). Regularly measure bound chlorine (chloramine) content and when its concentration reaches 0.3 g/m3 or higher, perform a superchlorination with CTX-200 GR (10-15 g/m3 of water).