Smart inlet nozzle, white ABS

Quality of pool water depends largely on the turnover system (the way water is supplied to and returned from the pool). Return jets serve to return already treated water back into the pool. They are usually placed opposite the skimmer or in places where it is necessary to stir the pool water. Jets must be set so that the entire contents of the pool circulate and so-called dead zones do not form. They are typically mounted 200mm below the surface, and the flow per jet should be 3 – 5 m3/h.

The jet is designed for pre-fabricated above-ground pools. ABS material from which the jets are made does not change due to exposure to chemical or atmospheric influences. The locking nut with a seal is always included with the jet.

Connected with a hose 32mm or 38mm.