Heater EOVTi - 6, 6 kW, 3 x 230 V

Electrical flow-through heaters are designed for heating water in swimming pools and spa baths; their operation consists in heating the water flowing through the heating element, the temperature of the heated water is set by a regulation thermostat. The heating element is switched by a contactor, which is controlled by the aforementioned thermostat, a safety flow indicator. For this reason, the heating requires the so-called large automation - a 24-hour filtration programmer, a residual current device (protection against dangerous touch voltage), motor thermal protection, a contactor and a heating switch. The entire heating unit is made of stainless titanium material (for saline water) or plastic.

Pool electric flow-through water heaters EOVTi are by their design specially engineered for heating pool water, or water in other circulating water loops with a flow and temperature up to 40°C. Each heater must be installed in the electrical system behind a residual current device. We therefore recommend equipping the device with an appropriate type of automatic control.

Electric heating EOVTi:

• converts electrical energy into thermal energy
• is made of high-quality PVC
• equipped with a titanium heating cartridge. Titanium best resists corrosion among available materials
• is 100% tested for watertightness
• this type of heating is suitable for abnormal loading and higher chlorine concentration. It can be used in combination with any water treatment, such as electro-chemical salt chlorinators, etc.
• is equipped with a thermostat up to 40°C and a thermal fuse
• is equipped with a flow switch that monitors water flow
• is equipped with 2 mounting brackets for easy installation

Operating conditions:

Dimensions:

Installation: