CTX-10 - 1.5 kg
pH reducer
Code: 03105
Over 5 pc(s) in stock
15,34 €
12,47 € exc. VAT
12,47 € exc. VAT
The pH of the water expresses the degree of acidity or basicity of a chemical substance. The pH value ranges from 0 to 14, where pH below 7 indicates acidic substances and pH above 7 basic substances. To ensure the proper action of disinfectants in pool water, pH should be maintained at 7.2 - 7.6. If proper pH is not maintained, there is increased consumption of disinfectants, water cloudiness, and irritation of the eyes and mucous membranes of bathers.
Granular product CTX-10 is intended to adjust the pH of pool water when the pH is higher than 7.6. The product is essential for proper treatment of pool water and prevents possible skin irritation at high pH.
SAFETY NOTICE
Use biocidal products safely. Before use, always read the information on the label and the attached product information.
Please read here Safety data sheet according to 1907/2006/EC, Article 31
SAFETY NOTICE
Use biocidal products safely. Before use, always read the information on the label and the attached product information.
Please read here Safety data sheet according to 1907/2006/EC, Article 31
Dosage:
1.5 kg CTX-10 will reduce the pH of 100 m3 of water by 0.2. This dosing is for orientation only. Exact dosing depends on the operating conditions of the pool.
Application: Dissolve the required amount of CTX-10 in water in a larger plastic container and evenly pour the solution over the surface of the pool. Then start your filtration system and allow the water to be filtered for 8 hours.
WARNING: During the product application and the following 8 hours, no one may be in the pool.
Composition: 95-100% sodium bisulfate
This form is not used to order goods!
